/1003/site-assets/logo.png){kind=logo}
Excel Insulated Adjustable Length Chimney Pipe
SKU: ICC ELA18
/1003/images/10231.jpg)
/1003/images/10232.jpg)
| EXCEL chimney is specifically engineered for wood burning stoves, fireplaces and residential furnaces and it is suitable for use on appliances that burn: - Wood - Oil- Coal - Gas - Charcoal - Allowable Flue Gas Temperatures Max Continuous 650°C (1200°F) Brief Forced Firing 925°C (1700°F) Tested To 1150°C (2100°F) Clearance to Combustible Materials 2" clearance except in areas protected by factory-built supports certified for reduced clearance. EXCEL round and square supports permit the chimney to be installed with approximately 1 inch of clearance - in the area shielded by the support. Construction Flue: .016" stainless steel Casing: .016" stainless steel Seam: Interior and exterior seams are continuous seam welded Insulation: Thermoplus continuous blanket Wall thickness: 1" Paint: All black EXCEL components are painted with Forrest “Stove Bright” flat black paint The most common applications for the adjustable length are: - Between elbows so that any required centre-to-centre offset can be achieved. - When it is necessary to balance the chimney height so that the caps line up for functional or aesthetic reasons. - When a specific horizontal offset is required. The adjustable length must be installed above a straight chimney length. It will not adjust into an elbow or tee. To determine the installed length deduct 1 1/2" from the overall length. To adjust the length, remove the screws, slide the sections of the outer casing together to the desired length and cut way the excess insulation. Do not cut the inner flue, it will slide inside the next chimney length. * Special Order. No returns on special order items. |
/1003/images/10231.jpg)
ICC 6ELA18
6" (dia) x 18" (L)
Each
QTY
$237.00
Add to cart