Waterford Erin OSA TV and RV Phase II

Waterford Stove Erin 90 OSA T/V and R/V Phase II

Waterford Erin Glass Replacement
(a) Open the firedoor fully
(b) Remove the four corner screws and clips and carefully remove the broken glass
(c) Clean the glass recess in door
(d) Attach adhesive thermal tape (window channel, our part # WC1AWK) to the perimeter of the replacement glass
(e) Place the thermal tape side of the glass into the door recess and replace the four corner clips and screws
(f) Make sure that the larger corner clip is fitted in the top right-hand corner
(g) Tighten screws. (finger tight, too tight will cause the glass to break)
(h) Replace glass only with ceramic glass
Glass Cleaning
The glass will clean itself when there is sufficient heat generated by the burning fuel. If a build-up of creosote occurs on the glass due to poor draft conditions, poor quality fuel, or very low burning for long periods of time, it is best to clean glass manually when glass is thoroughly cooled.

Waterford Erin OSA Larger Image
Waterford Erin OSA Phase II Parts List

Specific parts are no longer available for this manufacturer.
Generic parts such as grates, gaskets, baffles, etc may be
available by clicking the underlined word above or by
searching our website using the keyword search bar.